Material Safety Data Sheet

Manufacturer: POR-15 Inc., P.O. Box 1235, Morristown, NJ 07962-1235 Telephone: 973-887-1999

Factory: 64 South Jefferson Road, Whippany, NJ 07981

Emergency Telephone No: 973-887-1999, 800-457-6715, 973-539-3236, Chemtrec 800-424-9300

I. PRODUCT IDENTIFICATION

PRODUCT NAME: POR-15 EPOXY PUTTY TRADE NAME & SYNONYMS: Workable Epoxy Putty.

chemical family: Epoxy Resin and Amine Curing Agent chemical name: Epoxy Resin / Amine Hardener-based Putty

II. HAZARDOUS INGREDIENTS

No hazardous ingredients known at this time.

III. PHYSICAL DATA

BOILING POINT: N/A                                                          ODOR: Amine, fishy
FORM: Putty                                                                      VAPOR PRESSURE: N/A
VAPOR DENSITY (Air = 1): Non-volatile                           EVAPORATION RATE: Non-volatile
SPECIFIC GRAVITY: 1.57                                                  APPEARANCE AND ODOR: blue/white.
SOLUBILITY IN WATER: Insoluble                                     VOC: <1%
PH Value: N/A                                                                   PERCENT VOLATILE BY VOLUME: <1%
NOTE: The physical data represented above are typical values and should not be construed as a specification. For additional physical data and details on use, please obtain a technical data sheet for this product.

IV. FIRE & EXPLOSION DATA

FLAMMABILITY CLASS: IA FLASH RANGE: N/A EXPLOSIVE RANGE: N/A

EXTINGUISHING MEDIA: Water spray, CO2, foam, dry chemicals. UNUSUAL HAZARDS: Aldehydes, acids and oxides of carbon, nitrogen, and sulfur.

FIRE FIGHTING: Fire fighters and others who may be exposed to the products of combustion should be equipped with NIOSH-approved positive pressure self-contained breathing apparatus (SCBA) and full protective clothing.

V. HEALTH HAZARD DATA

Permissible exposure level: n/a
OVEREXPOSURE EFFECTS: Inhalation: None Ingestion: Irritation of the intestinal tract. Eye, skin contact: Possible irritant. FIRST AID: Remove to fresh air, seek medical advice. Skin Contact: Wash with plenty of soap and water. Eyes: Flush with water for 15 minutes, seek medical advice.

VI. REACTIVITY DATA

STABILITY: Stable                             MATERIALS TO AVOID: None POLYMERIZATION: Will not occur. INCOMPATIBILITY: None
CONDITIONS TO AVOID: None                     HAZARDOUS DECOMPOSITION PRODUCTS: Aldehydes, oxides, acids.

VII. SPILL/LEAK PROCEDURES

Not applicable; scrape up excess from floor, then wash area with soap and water.

VIII. SPECIAL PROTECTION INFORMATION

VENTILATION: Not required. GLOVES, EYE PROTECTION: Not required. RESPIRATORY PROTECTION: Not required.

IX. SPECIAL PRECAUTIONS

HANDLING & STORAGE: Store in cool, dry area in tightly closed container. Optimum storage is 65-80 Degrees F. Avoid gross contamination of skin and eyes. If eye contact occurs, flush immediately with copious amounts of water and seek prompt medical attention.

REVISED 11/24/05