 |
Degrease
and clean surface
Clean the rusty metal surface with MARINE
CLEAN
CLEAN™
degreaser/ cleaner. An environmentally safe cleaner, MARINE CLEAN™
will remove dirt, grease, wax or other contaminants that could interfere
with the restoration. |
 |
 |
Neutralize
Rust - etch metal
Prepare the rusty metal surface with METAL-READY™.As
a rust remover, METAL-READY™ will neutralize rust, etch metal
for better adhesion, and coat the metal with zinc phosphate to encourage
deep chemical bonding of POR-15™ to the base metal and rust. |
 |
 |
Apply
rust preventive coating to surface
Seal the rusty metal with POR-15™
Rust
Preventive Coating. As the moisture resistant POR-15™ bonds to
the rusty metal, it will form an unbelievably tough, almost ceramic-like
finish that will not crack, chip or peel. |
 |
 |
Topcoat
the surface
Topcoat the metal surface with CHASSIS
COAT BLACK™.
The semi-gloss black CHASSIS COAT BLACK™ provides the frame,
chassis or underbody finish desired by most restorers as it protects the
underlying POR-15™ from harmful UV light. This step is not
always necessary, it really depends on the location of the application.
Call 1-800-689-7504 for more details. |
 |
|
